2013 PYR 1129 Standard
When you select a digital product (pdf or digital access), you are purchasing a license to access NFPA Information electronically. To protect the authenticity of your product, certain restrictions apply.

NFPA Members save an additional 10%.

Item #: NFPA_1129
Price: $0.00
Formats Available:
Quantity:
  • Description

    The 2013 edition of PYR 1129: Standard Method of Fire Tests for Covered Fuse on Consumer Fireworks, is provided for historical reference only. This edition of PYR 1129 was withdrawn by Standards Council Decision #14-1. In Decision #14-1, the Standards Council directed that NFPA® cease all standards development activity regarding the retail sale and storage of consumer fireworks.

     

  • Table of Contents (2013 Edition)

    PYR 1129: Standard Method of Fire Test for Covered Fuse on Consumer Fireworks, 2013 Edition

    Chapter 1 Administration
    1.1 Scope
    1.2 Purpose
    Chapter 2 Referenced Publications
    2.1 General
    2.2 NFPA Publications
    2.3 Other Publications
    2.4 References for Extracts in Recommendation Sections
    Chapter 3 Definitions
    3.1 General
    3.2 NFPA Official Definitions
    3.3 General Definitions
    Chapter 4 Open Flame Test Procedure
    4.1 Summary of the Method
    4.2 Test Equipment
    4.3 Geometry and Construction of the Open Flame Test Environment
    4.4 Attachment of the Test Sample to the Equipment
    4.5 Number of Tests
    4.6 Application of Flame to the Test Sample
    4.7 Timing of the Open Flame Exposure
    4.8 Environmental and Safety Conditions
    4.9 Interpretation of Results
    4.10 Acceptance Criteria
    Chapter 5 Hot Surface Contact Ignition Test Procedure
    5.1 Test Equipment
    5.2 Geometry and Construction of the Hot Surface Fire Test Environment
    5.3 Attachment of the Test Sample to the Equipment
    5.4 Number of Tests
    5.5 Application of Hot Surface to the Test Sample
    5.6 Timing of the Hot Surface Exposure
    5.7 Environmental and Safety Conditions
    5.8 Interpretation of Results
    5.9 Acceptance Criteria
    Chapter 6 Incendiary Spark Ignition Test Procedure
    6.1 Test Equipment
    6.2 Geometry and Construction of the Incendiary Spark Test Environment
    6.3 Attachment of Test Sample and the Incendiary Spark Ignition Source
    6.4 Number of Tests
    6.5 Timing of the Incendiary Spark Ignition Source
    6.6 Timing of the Incendiary Spark Ignition Source
    6.7 Environmental and Safety Conditions
    6.8 Interpretation of Results
    6.9 Acceptance Criteria
    Chapter 7 Test Report
    7.1 Video Test Record
    7.2 Test Documentation
    7.3 Written Report for Associated Fuse Covers over Fuse or Ignition Points
    7.4 Written Report for Packaging Used as Covered Fuse
    7.5 Written Report — Failed Test Documentation
    7.6 Written Report — Description of Fireworks Sample
    7.7 Covered Fuse Markings
    Annex A Explanatory Material
    Annex B Informational References
    Index
  • NFPA Digital Products

    Licensed PDFs can be accessed immediately. Instructions can be found in your order confirmation.