2019 NFPA 1917 Standard - Current Edition
When you select a digital product (pdf or digital access), you are purchasing a license to access NFPA Information electronically. To protect the authenticity of your product, certain restrictions apply.

Build your own set and Save 15%. NFPA Members save an additional 10%.

Item #: NFPA_1917
Price: $0.00
Edition:
Formats Available:




Quantity:
  • Description

    New technical content in the 2019 edition of NFPA 1917, Standard for Automotive Ambulances helps you provide safer ambulances for first responders and the public.

    Including new crash tests and a host of other changes, the 2019 edition of NFPA 1917 is essential for manufacturers as well as any agency or organization that uses an ambulance to provide pre-hospital medical care. Modeled after the Federal Specification KKK-A-1822 and NFPA 1901, Standard for Automotive Fire Apparatus, this critical standard defines the minimum requirements for the design, performance, and testing of new automotive ambulances intended for use under emergency conditions to provide medical treatment and transportation of sick or injured people to appropriate medical facilities.

    Featuring stand-alone chapters and easy-to-read graphics, NFPA 1917 is your comprehensive source for requirements for the design, performance, and testing of new and remounted ambulances.

    In addition to definitions based on current terminology, the standard presents general requirements for ambulance design and performance, including stand-alone chapters for ambulance components, chassis, patient compartments, low-voltage electrical systems and warning devices, and line voltage electrical systems — with specific provisions for test methods. NFPA 1917 streamlines technical information with easy-to-read charts and graphics, and references NFPA 70®, National Electrical Code® (NEC®), NFPA 1901, and NFPA 1906; ASTM, IPC, and SAE publications; ANSI/UL standards; and other government publications.

    Changes in this edition reflect the demand for greater vehicle safety:

    • New crash tests from the Society of Automotive Engineers (SAE).
    • Revised text for third-party testing and certification and for self-certification by the final stage ambulance manufacturer (FSAM) help ensure quality standards are met.
    • Clarified language specifies where third-party testing and certification must occur and where self-certification can occur by the FSAM.
    • All-new Chapter 10 and Annex C provide requirements and additional advice to assist the AHJ in purchasing a remounted or refurbished ambulance — and address a lack of information to regulate or assist AHJs in these specific areas.

    Update to the 2019 edition of NFPA 1917 for the most up-to-date information for manufacturers, testing organizations, and state EMS officials who adopt the standard in their jurisdiction. (Print, 64 pp., 2019)

     

    Interested in other editions of NFPA 1917? Use the drop down menu above to select the edition year you need.

  • Table of Contents (2019 Current Edition)

    NFPA® 1917 Standard for Automotive Ambulances, 2019 Edition

    Chapter 1 Administration
    1.1 Scope.
    1.2 Purpose.
    1.3 Application.
    1.4 Retroactivity.
    1.5 Equivalency.
    1.6 Units and Formulas.
    Chapter 2 Referenced Publications
    2.1 General.
    2.2 NFPA Publications.
    2.3 Other Publications.
    2.4 References for Extracts in Mandatory Sections.
    Chapter 3 Definitions
    3.1 General.
    3.2 NFPA Official Definitions.
    3.3 General Definitions.
    Chapter 4 General Requirements
    4.1 General.
    4.2 Responsibility of the Purchaser.
    4.3 Responsibility of the Contractor.
    4.4 Ambulance Components.
    4.5 Legal Requirements.
    4.6 Third-Party Certification of Test Results.
    4.7 Manufacturer Certification of Test Results.
    4.8 Personnel Protection.
    4.9 Controls and Instructions.
    4.10 Component Protection.
    4.11 Ambulance Performance.
    4.12 Road Performance.
    4.13 Serviceability.
    4.14 Tests on Delivery.
    4.15 Documentation.
    4.16 Data Required of Contractor.
    4.17 Statement of Exceptions.
    Chapter 5 Chassis
    5.1 Carrying Capacity.
    5.2 Weight Distribution.
    5.3 Engine and Engine System Design.
    5.4 Engine Speed Auxiliary Control Device.
    5.5 Exhaust System.
    5.6 Braking System.
    5.7 Suspension.
    5.8 Wheels and Tires.
    5.9 Vehicle Stability.
    5.10 Bumpers.
    5.11 Cab Seal.
    5.12 Front Seats.
    5.13 Mirrors.
    5.14 Cab Integrity.
    Chapter 6 Patient Compartment
    6.1 Patient Compartment Configuration.
    6.2 Mounting.
    6.3 Structural Integrity — Roof Loading.
    6.4 Body Sealing.
    6.5 Wheel Housings.
    6.6 Patient Compartment to Cab Partition.
    6.7 Access Handrails or Handholds.
    6.8 Patient Compartment Entry Doors.
    6.9 Means of Egress.
    6.10 Exterior Stepping Surfaces and Interior Steps.
    6.11 Exterior Storage.
    6.12 Floor.
    6.13 Floor Covering.
    6.14 Insulation.
    6.15 Interior Storage.
    6.16 Interior Surfaces.
    6.17 Equipment Mounting.
    6.18 Waste and Sharps Disposal.
    6.19 Fire Extinguishers.
    6.20 Holder for Intravenous Fluid Containers.
    6.21 Patient Compartment Seats.
    6.22 Patient Cot Retention.
    6.23 HVAC.
    6.24 Interior Noise.
    6.25 Reflective Striping.
    6.26 Metal Finish.
    6.27 Painting.
    6.28 Medical Gas — Main Supply and Installation.
    6.29 Suction Aspirator.
    Chapter 7 Low Voltage Electrical Systems and Warning Devices
    7.1 General.
    7.2 Wiring.
    7.3 Power Supply.
    7.4 Operational Electrical Load Test Conditions.
    7.5 Load Management.
    7.6 Batteries.
    7.7 Temperature Exposure.
    7.8 Electromagnetic Interference.
    7.9 Optical Warning Devices.
    7.10 Audible Warning Devices.
    7.11 Exterior and Interior Lighting.
    7.12 Do-Not-Move Ambulance Light.
    7.13 Backup Alarm.
    7.14 Stop, Tail, and Directional Lights.
    7.15 Communications Equipment.
    Chapter 8 Line Voltage Electrical Systems
    8.1 General.
    8.2 General Requirements.
    8.3 Grounding and Bonding.
    8.4 Ground-Fault Circuit Interrupters.
    8.5 Wiring Methods.
    8.6 Wiring System Components.
    8.7 Cord Reels.
    8.8 Transfer Switch Applications.
    8.9 Scene Lighting Systems.
    8.10 Appliance Accessibility and Fastening.
    Chapter 9 Line Voltage Power Source
    9.1 Line Voltage Power Derived from an Inverter.
    9.2 Generators Rated Below 11 hp (8 kW) General Requirements.
    9.3 Power Sources of 11 hp (8 kW) or Larger.
    9.4 Wiring for Portable Generator.
    Chapter 10 Remounted Ambulance Patient Compartments
    10.1 Application.
    10.2 Equivalency.
    10.3 General.
    10.4 Responsibility of the Purchaser.
    10.5 Responsibility of the Contractor.
    10.6 Remounted Ambulance Components.
    Annex A Explanatory Material
    Annex B Additional Information for Assessing Suitability and Scope for Remounts
    Annex C Informational References
  • Prior Editions

    2016 Edition

    Protect patients and EMS personnel during transport in emergencies. Make sure new ambulances comply with NFPA 1917, Standard for Automotive Ambulances.

    Do your best to ensure new ambulances are safe and reliable for patients and EMS staff with the updated, second edition of NFPA 1917. Modeled after the Federal Specification KKK-A-1822 and NFPA 1901, Standard for Automotive Fire Apparatus, this critical Standard defines the minimum requirements for the design, performance, and testing of new automotive ambulances intended for use under emergency conditions to provide medical treatment and transportation of sick or injured people to appropriate medical facilities.

    NFPA 1917 is essential for manufacturers as well as any agency or organization that uses an ambulance to provide pre-hospital medical care.

    In addition to definitions based on current terminology, the Standard presents general requirements for ambulance design and performance, including standalone chapters for ambulance components, chassis, patient compartment, low voltage electrical systems and warning devices, and line voltage electrical systems; with specific provisions for test methods. NFPA 1917 streamlines technical information through easy-to-read charts and graphics, and references NFPA 70®, National Electrical Code® (NEC®), NFPA 1901, and NFPA 1906; ASTM, IPC, and SAE publications; ANSI/UL Standards; and other Government publications.

    Changes in the 2016 edition address the needs and demands of today's EMS community.

    • The maximum speed of the vehicle is now based on the rating of the vehicle's tires.
    • New coverage of different patterns for retro-reflective material, and an increase to the percentage of retro-reflective materials that must be used, help make ambulances more visible at night.
    • Updates to the statement of exceptions allow for wider use and adoption by the AHJ.
    • New SAE testing standards, including the new coverage of seat and cot/litter retention, help provide a safer working environment for both occupants and EMS personnel.
    • New references to several AMD standards are now part of the testing requirements.

    Update to the 2016 NFPA 1917 for the most up-to-date information for manufacturers, testing organizations, and state EMS officials who adopt the Standard in their jurisdiction. (Softbound, 53 pp., 2016)

     

    Interested in other editions of NFPA 1917? Use the drop down menu above to select the edition year you need.

  • NFPA Digital Products

    Licensed PDFs can be accessed immediately. Instructions can be found in your order confirmation.