2018 NFPA 54/ANSI Z223.1 Code - Current Edition

Save 15% when you buy two or more formats! NFPA Members save an extra 10%.

Item #: NFPA_54
Price: $0.00
Edition:
Code Formats Available:























Handbook Formats Available:







Spanish Code Formats Available:

eForms:
Quantity:

* Order it now! You will not be charged until each product ships or is ready for download.

  • Description

    Ensure a safe fuel gas installation using the 2018 edition of NFPA 54/ANSI Z223.1: National Fuel Gas Code.

    NFPA 54/ANSI Z223.1: National Fuel Gas Code provides industry-accepted guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories. The 2018 edition includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today. From design to installation, maintenance, and inspection -- no matter what aspect of fuel gas safety your job involves, the latest edition of the National Fuel Gas Code is essential.

    Update to the 2018 edition of the National Fuel Gas Code for greater confidence in CSST bonding.

    Be sure you're working with the most up-to-date information on the National Fuel Gas Code's bonding requirement for corrugated stainless steel tubing (CSST). All CSST used for fuel gas piping must be bonded to the building grounding system to prevent damage to the system due to nearby lightning strikes. In the 2018 edition, revisions to piping requirements include allowing listed arc-resistant jacket or coated CSST to use the appliance's electrical grounding connector as the bonding means and recognizing stainless steel smooth wall pipe and tubing products as acceptable piping materials.

    Other changes impact contractors, installers, and code officials:

    • The minimum allowed wall thickness of carbon and stainless steel pipe is revised to Schedule 10, however joints on Schedule 10 pipe cannot be made with screwed fittings.
    • Press-connect fittings are now an acceptable joining method for pipe.
    • Revisions to the venting requirements include requiring listing to the appropriate UL standards for plastic venting materials, factory-built chimneys, Type B and BW vents, chimney lining systems, and special gas vents.
    • Direct vent clearances to building openings for appliances with an input above 150,000 Btu (44 kW) are to be in accordance with the appliance manufacturer's installation instructions.
    • An existing gas appliance installation is required to be inspected for combustion air and venting code compliance when the building structure that it is installed in is modified with specific air infiltration-reducing changes.

    Annexes provide a wealth of additional information such as:

    • Details on coordinating appliance and equipment design, construction, and maintenance -- including a design and construction checklist
    • Steps on checking for leakage and suggested emergency procedures for gas leaks

    Never underestimate fuel gas dangers!

    The National Fuel Gas Code provides the most effective means of ensuring fuel gas safety on consumers' premises. Update now for the latest pipe sizing tables; design requirements; installation provisions; inspection, testing, and purging requirements; and venting system rules that address fuel gas risks. (Softbound, Approx. 168 pp., 2018)

  • Table of Contents (2018 Current Edition)

    NFPA® 54 ANSI Z223.1–2018 National Fuel Gas Code, 2018 Edition

    Chapter 1 Administration
    1.1 Scope.
    1.2 Purpose.
    1.3 Retroactivity.
    1.4 Equivalency.
    1.5 Enforcement.
    Chapter 2 Referenced Publications
    2.1 General.
    2.2 NFPA Publications.
    2.3 Other Publications.
    2.4 References for Extracts in Mandatory Sections.
    Chapter 3 Definitions
    3.1 General.
    3.2 NFPA Official Definitions.
    3.3 General Definitions.
    Chapter 4 General
    4.1 Qualified Agency.
    4.2 Interruption of Service.
    4.3 Prevention of Accidental Ignition.
    4.4 Noncombustible Material.
    Chapter 5 Gas Piping System Design, Materials, and Components
    5.1 Piping Plan.
    5.2 Provision for Location of Point of Delivery.
    5.3 Interconnections Between Gas Piping Systems.
    5.4 Sizing of Gas Piping Systems.
    5.5 Operating Pressure.
    5.6 Acceptable Piping Materials and Joining Methods.
    5.7 Gas Meters.
    5.8 Gas Pressure Regulators.
    5.9 Overpressure Protection Devices.
    5.10 Back Pressure Protection.
    5.11 Low-Pressure Protection.
    5.12 Shutoff Valves.
    5.13 Excess Flow Valve(s).
    5.14 Expansion and Flexibility.
    Chapter 6 Pipe Sizing
    6.1 Pipe Sizing Methods.
    6.2 Sizing Natural Gas Piping Systems.
    6.3 Sizing Propane Piping Systems.
    6.4 Sizing Equations.
    Chapter 7 Gas Piping Installation
    7.1 Installation of Underground Piping.
    7.2 Installation of Aboveground Piping.
    7.3 Concealed Piping in Buildings.
    7.4 Piping in Vertical Chases.
    7.5 Gas Pipe Turns.
    7.6 Drips and Sediment Traps.
    7.7 Outlets.
    7.8 Manual Gas Shutoff Valves.
    7.9 Prohibited Devices.
    7.10 Systems Containing Gas–Air Mixtures Outside the Flammable Range.
    7.11 Systems Containing Flammable Gas-Air Mixtures.
    7.12 Electrical Bonding and Grounding.
    7.13 Electrical Circuits.
    7.14 Electrical Connections.
    Chapter 8 Inspection, Testing, and Purging
    8.1 Pressure Testing and Inspection.
    8.2 Piping System Leak Check.
    8.3 Purging Requirements.
    Chapter 9 Appliance, Equipment, and Accessory Installation
    9.1 General.
    9.2 Accessibility and Clearance.
    9.3 Air for Combustion and Ventilation.
    9.4 Appliances on Roofs.
    9.5 Appliances in Attics.
    9.6 Appliance and Equipment Connections to Building Piping.
    9.7 Electrical.
    9.8 Room Temperature Thermostats.
    Chapter 10 Installation of Specific Appliances
    10.1 General.
    10.2 Air-Conditioning Appliances (Gas-Fired Air Conditioners and Heat Pumps).
    10.3 Central Heating Boilers and Furnaces.
    10.4 Clothes Dryers.
    10.5 Conversion Burners.
    10.6 Decorative Appliances for Installation in Vented Fireplaces.
    10.7 Gas Fireplaces, Vented.
    10.8 Non-Recirculating Direct Gas-Fired Industrial Air Heaters.
    10.9 Recirculating Direct Gas-Fired Industrial Air Heaters.
    10.10 Duct Furnaces.
    10.11 Floor Furnaces.
    10.12 Food Service Appliance, Floor-Mounted.
    10.13 Food Service Appliances, Counter Appliances.
    10.14 Household Cooking Appliances.
    10.15 Illuminating Appliances.
    10.16 Incinerators, Commercial-Industrial.
    10.17 Infrared Heaters.
    10.18 Open-Top Broiler Units.
    10.19 Outdoor Cooking Appliances.
    10.20 Pool Heaters.
    10.21 Refrigerators.
    10.22 Room Heaters.
    10.23 Stationary Gas Engines.
    10.24 Gas-Fired Toilets.
    10.25 Unit Heaters.
    10.26 Wall Furnaces.
    10.27 Water Heaters.
    10.28 Compressed Natural Gas (CNG) Vehicular Fuel Systems.
    10.29 Appliances for Installation in Manufactured Housing.
    10.30 Fuel Cell Power Plants.
    10.31 Outdoor Open Flame Decorative Appliances.
    Chapter 11 Procedures to Be Followed to Place Appliance in Operation
    11.1 Adjusting the Burner Input.
    11.2 Primary Air Adjustment.
    11.3 Safety Shutoff Devices.
    11.4 Automatic Ignition.
    11.5 Protective Devices.
    11.6 Checking the Draft.
    11.7 Operating Instructions.
    Chapter 12 Venting of Appliances
    12.1 Minimum Safe Performance.
    12.2 General.
    12.3 Specification for Venting.
    12.4 Design and Construction.
    12.5 Type of Venting System to Be Used.
    12.6 Masonry, Metal, and Factory-Built Chimneys.
    12.7 Gas Vents.
    12.8 Single-Wall Metal Pipe.
    12.9 Through-the-Wall Vent Termination.
    12.10 Condensation Drain.
    12.11 Vent Connectors for Category I Appliances.
    12.12 Vent Connectors for Category II, Category III, and Category IV Appliances.
    12.13 Draft Hoods and Draft Controls.
    12.14 Manually Operated Dampers.
    12.15 Automatically Operated Vent Dampers.
    12.16 Obstructions.
    Chapter 13 Sizing of Category I Venting Systems
    13.1 Additional Requirements to Single Appliance Vent.
    13.2 Additional Requirements to Multiple-Appliance Vent.
    Annex A Explanatory Material
    Annex B Sizing and Capacities of Gas Piping
    Annex C Suggested Method of Checking for Leakage
    Annex D Suggested Emergency Procedure for Gas Leaks
    Annex E Flow of Gas Through Fixed Orifices
    Annex F Sizing of Venting Systems Serving Appliances Equipped with Draft Hoods, Category I Appliances, and Appliances Listed for Use with Type B Vents
    Annex G Recommended Procedure for Safety Inspection of an Existing Appliance Installation
    Annex H Indoor Combustion Air Calculation Examples
    Annex I Example of Combination of Indoor and Outdoor Combustion and Ventilation Opening Design
    Annex J Enforcement
    Annex K Informational References
  • Prior Editions

    NFPA 54: National Fuel Gas Code provides the most effective means of ensuring fuel gas safety on consumers' premises.

    NFPA 54: National Fuel Gas Code provides critical guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories. Installers, designers, AHJs, maintainers, inspectors, and facility managers look to the Code for design requirements; inspection, testing, and purging requirements; pipe sizing tables; and venting system rules that address fuel gas risks. Each edition builds on the next, through consensus-based changes that reflect the evolving needs of the field and the latest information about fuel gas safety.

    • The 2015 NFPA 54: National Fuel Gas Code includes updates based on recognized risks, recent research, and the techniques, materials, developments, and construction practices in use today. From design to installation, maintenance, and inspection.
    • The 2012 NFPA 54 incorporates indoor gas piping purging rules that address recommendations by the U.S. Chemical Safety Board (CSB). In response to a devastating gas piping purging accident, NFPA 54 received an emergency Tentative Interim Amendment to the purging requirements in the 2009 Code. With minor editorial changes, the 2012 NFPA 54 presents these new rules specifying mandatory use of combustible gas indicators and detectors so employers can identify the presence of fuel gas. Other major changes improve safety and facilitate Code application; such as a new bonding clamp location for Corrugated Stainless Steel Tubing (CSST) gas piping that clarifies bonding requirements added in the 2009 edition.
    • The 2009 NFPA 54: National Fuel Gas Code reflects scores of proposals from the field. A new bonding requirement for Corrugated Stainless Steel Tubing (CSST) gas piping installed inside buildings helps protect against threats likely to energize gas piping. This edition also addresses a new system of connecting copper tubing using a crimping tool for press-connect fittings, and includes a new rule for a dedicated master shutoff valve for laboratories. Revised requirements for connectors to radiant tube heaters help prevent cracks, leaks, or fractures. Additional requirements for commercial cooking appliance connectors reduce the risk of fugitive gas, potential fires, and subsequent losses.
    • The 2006 NFPA 54: National Fuel Gas Code includes revised data that helps designers and engineers properly size longer installations; dozens of pipe sizing tables have been extended with information for all piping up to 2,000 feet. A first-time requirement addresses support of rooftop piping to protect against wind damage. Revised requirements for appliance shutoff valves allow manifold systems with all shutoff valves in one location up to 50 feet from the most remote appliance. Definitions are organized by categories, and chapters dealing with piping, installation, and venting are grouped together for ease of use.

    Interested in other editions of NFPA 54? Use the drop down menu above to select the edition year you need.

  • NFPA eBooks and PDF's

    NFPA® eBooks and PDFs can be downloaded immediately after purchase for quick, easy access. For the best reading experience, NFPA recommends using the free NFPA eReader application, NFPA eLibrary.

    Download now.

    Google Play Store badge

    About the free NFPA eLibrary app
    The free NFPA eLibrary app gives you access to your NFPA eBooks and PDFs both online and offline. The app has tools to help you get your job done, search, highlight text, add bookmarks, or copy and paste text into your documents and presentations. Sign-in with your NFPA username and password. Access is immediate.

    Accessing
    Upon purchase of an NFPA eBook or PDF, you will be prompted with instructions for downloading and accessing.

  • NFPA eForms

    NFPA® now makes available PDF versions of forms originally published in our NFPA Standards and handbooks. These eForms allow you to fill in the form fields electronically and then save, print, or share the file. NFPA eForms are intended for use on computers and are compatible with some mobile devices and apps. An internet connection is not needed to fill in and save the forms once they are downloaded to your device.

    NFPA eForms can be used with many PDF applications. Functions of the specific PDF application will work on the forms. For example, most PDF applications include a signature feature, allowing you to use your finger, stylus, or mouse to sign a document.

    Note that NFPA eForms are not compatible with the NFPA eLibrary app.

    Features of the NFPA eForms include:

    • Editable fields and checkboxes that allow you to enter content
    • Spell check
    • Easy file sharing (through email or Cloud storage)
    • Printing
    • Basic PDF markup tools, including highlighting and comment boxes
    • A "Learn More" button with explanatory comments to help you understand the requirements necessary to complete the form
    • Electronic signature
    • Searching form text
    • Table of contents with links to each form within the file
    • Dedicated placeholder to add company logo

    Additional features that may be available, depending on PDF software/app you choose:

    • Text message sharing of forms
    • Attaching files to PDF (including audio files)
    • Duplicating forms
    • Advanced tools, including inserting stamps and inserting images
    • Clearing all fields at once
    • Searching extended to include form fields
    • Extracting pages from the full file
    • Save “flattened” option that prevents further editing of content entered into form fields
    • Automatic saving when closing the file
    • Date fields with scroll bar selection

    Directions on how to use on a desktop or mobile device are provided on the first page of the PDF.

  • eForms Table of Contents (2018)
    • Calculating Pipe Size Using the Longest Length Method
    • Calculating Pipe Size Using the Branch Length Method
    • Sizing Combustion Air Using the Standard Method
    • Sizing Combustion Air Using the KAIR Method
    • Calculating the Size of Combustion Air Openings
    • Calculating the Size of Reduced Building Area Openings
    • Calculating Vent Size for Single Appliance
    • Calculating Vent Size for Two (or more) Appliances
  • What is a Redline PDF?

    NFPA®'s Redline PDF contains both the current NFPA document and a Redline version of the document which shows changes from the previous edition marked in color. With the Redline you can quickly spot changed sections and tell specifically what has been changed from the previous edition, saving time and confusion.

    • Changed sections are marked with a vertical rule.
    • Deleted material is shown in red strikethrough type.
    • New material appears in blue underscored type.

     

    Sample (NEC® 2014)

    411.2411.3 Definition. Low-Voltage Lighting Systems.

     

    (A) General. Lighting Ssystems Ooperating at 30 Volts- volts or  Less. A lighting system consisting less shall consist of an isolating power supply, the low-voltage luminaires, and associated equipment that are all identified for the use. The output circuits of the power supply are shall be rated for not more than 25 amperes and  operate at 30 volts (42.4 volts peak) or lessmaximum under all load conditions.

     

    (B) Class 2. Listed Class 2 lighting equipment shall be rated in conformance with Chapter 9, Table 11(A) or Table 11(B).

     

    411.3411.4 Listing Required. Lighting systems operating at 30 volts or less shall comply with 411.3(A)411.4(A) or 

    411.3(B).411.4(B). Class 2 power sources and lighting equipment connected to Class 2 power sources shall be llisted.

  • Also in NFPA 54: National Fuel Gas Code