NFPA 241: Standard for Safeguarding Construction, Alteration, and Demolition Operations

Available Discounts

 Members Save 10%

  •  
Save 15% with a Set!

  • Order now and save 15% on 2 or more formats.
Item #: NFPA_241
List Price: $0.00
2013 NFPA 241
Prior Years Prior Editions of NFPA 241
Quantity:

Eliminate or control fire dangers during construction, alteration, and demolition of buildings with the 2013 edition of NFPA 241.

Fire potential during construction, alteration, or demolition operations is inherently high, and NFPA 241: Standard for Safeguarding Construction, Alteration, and Demolition Operations provides measures for preventing or minimizing fire damage to structures, including those in underground locations, during such activities.

Ensure adequate fire protection with these important changes:

  • Temporary heating devices must be installed per manufacturer specifications and, if electrical, the devices must be equipped with tip-over protection and overheat cut-offs.
  • Lower, completed floors can be occupied while upper floor construction continues if both:
    • Sprinklers are completed and tested for the occupied, lower floors
    • Separate systems are provided on upper floors so as not to impact systems on lower floors

Construction or demolition contractors, insurance professionals, risk managers, fire service professionals, building owners, and building engineers reference NFPA 241 to avoid fire dangers on the job. (Softbound, 22 pp., 2013)

NFPA® 241 Standard for Safeguarding Construction, Alteration, and Demolition Operations 2013 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Application
1.4 Equivalency
1.5 Units and Formulas
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Temporary Construction, Equipment, and Storage
4.1 Application
4.2 Temporary Offices and Sheds
4.3 Temporary Enclosures
4.4 Equipment
Chapter 5 Processes and Hazards
5.1 Hot Work
5.2 Temporary Heating Equipment
5.3 Smoking
5.4 Waste Disposal
5.5 Flammable and Combustible Liquids and Flammable Gases
5.6 Explosive Materials
Chapter 6 Utilities
6.1 Electrical
Chapter 7 Fire Protection
7.1 Fire Safety Program
7.2 Owner's Responsibility for Fire Protection
7.3 Installation, Testing, and Maintenance
7.4 Fire Alarm Reporting
7.5 Access for Fire Fighting
7.6 Standpipes
7.7 First-Aid Fire-Fighting Equipment
7.8 Means of Egress
Chapter 8 Safeguarding Construction and Alteration Operations
8.1 General
8.2 Scaffolding, Shoring, and Forms
8.3 Construction Material and Equipment Storage
8.4 Permanent Heating Equipment
8.5 Utilities
8.6 Building Separation Walls
8.7 Fire Protection During Construction
Chapter 9 Safeguarding Roofing Operations
9.1 General
9.2 Asphalt and Tar Kettles
9.3 Single-Ply and Torch-Applied Roofing Systems
9.4 Fire Extinguishers for Roofing Operations
9.5 Fuel for Roofing Operations
Chapter 10 Safeguarding Demolition Operations
10.1 General
10.2 Special Precautions
10.3 Temporary Heating Equipment
10.4 Smoking
10.5 Demolition Using Explosives
10.6 Utilities
10.7 Fire Cutoffs
10.8 Fire Protection During Demolition
Chapter 11 Safeguarding Underground Operations
11.1 General
11.2 Emergency Procedures
11.3 Fire Detection, Protection, and Communications Systems
11.4 Electrical
11.5 Hazardous Operations and Procedures
11.6 Storage
11.7 Equipment
Annex A Explanatory Material
Annex B Informational References
Index