NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film

Available Discounts

 Members Save 10%

  •  
Save 15% with a Set!

  • Order now and save 15% on 2 or more formats.
Item #: NFPA_40
List Price: $0.00
2011 NFPA 40
Prior Years Prior Editions of NFPA 40
Quantity:

Keep pace with the latest rules for safe engine operation and minimize fire hazards with the 2010 NFPA 37.

NFPA 37: Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines governs the installation and use of stationary engines and gas turbines fueled by liquid or gaseous fuels as prime movers for emergency generators, fire pumps, and stand-by and peak power systems. Requirements address system installation, fuel supplies, lubricating systems, engine exhaust systems, control and instrumentation, instructions, and fire protection features.

Make sure you're in the know about these important changes in the 2010 Standard:

  • Addition of guidance statements concerning retroactivity and equivalency
  • Enhanced definitions of ''automatic safety shutoff valve'' and ''automatic safety vent valve''
  • Clarification of alternatives to the minimum separation required between an engine and an adjacent structure
  • Amendments to the required safety components that must be provided in a fuel gas train for internal combustion engines
  • New requirements for the safety components that must be provided for the fuel gas train for gas turbines that are distinct from those for internal combustion engines
  • Acceptance of secondary containment-type fuel supply tanks for roof top installation
  • Provision requiring a double block valve arrangement in liquid fuel lines as a fire and explosion mitigation measure
  • Complete revision of Chapter 9: Control and Instrumentation, to establish minimum required protective controls for engines and turbines; to identify, for constantly attended installations, those devices that can safely be replaced by alarms and procedures; to incorporate necessary explanatory information in the Annex
  • Complete revision of Chapter 11: Fire Protection Features, and incorporation of necessary explanatory information in the Annex
  • Clarification of the procedure for calculating the fuel input rating

(Softbound, 25 pp., 2010)

NFPA® 40 Standard for the Storage and Handling of Cellulose Nitrate Film 2011 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Application
1.4 Retroactivity
1.5 Equivalency
1.6 Approval of Plans
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections. (Reserved)
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Construction Requirements and Arrangements of Buildings
4.1 Construction
4.2 Exits
4.3 Explosion Venting
4.4 Space for Workers
4.5 Tables and Racks
4.6 Electrical Equipment
4.7 Heating, Cooling, and Refrigeration Equipment
4.8 Duct Systems
Chapter 5 Fire Protection
5.1 Automatic Sprinklers
5.2 Water Supplies
5.3 Portable Fire Extinguishers
Chapter 6 Storage of Nitrate Film
6.1 General
6.2 Film Cabinets
6.3 Vaults Other Than Extended Term Storage Vaults
6.4 Extended Term Storage Cabinets
6.5 Extended Term Storage Vaults
Chapter 7 Handling of Nitrate Film
7.1 General Conditions
7.2 Containers Required
7.3 Shielding
7.4 Scrap and Discarded Film
7.5 Transportation
Chapter 8 Motion Picture Projection and Special Processes
8.1 Enclosures for Motion Picture Projectors
Chapter 9 Special Occupancies
9.1 Motion Picture Film Exchanges
9.2 Motion Picture Film Laboratories
Annex A Explanatory Material
Annex B Additional Information on Cellulose Nitrate Film
Annex C History of Cellulose Nitrate Film Use and Storage
Annex D Informational References
Index